Quartz has a predictable pattern, which gives more freedom in where a seam can go. Seams are filled with an epoxy tinted to the slab, and the finished counter needs no sealer once it's in.
Countertop Installation in Fresno, CA
The crew that sets your cabinets sets the stone
Countertop installation in Fresno works best when one team handles both the cabinets and the stone. The counter is templated from the cabinets already in place, so how well those boxes are leveled decides how well the stone sits.
With us, there's no handoff between a cabinet company and a separate fabricator. The crew that levels your cabinets books your template visit, and your countertops are cut and installed in house.
Sergey and Dennis Tsytsyn learned remodeling by working alongside their father, and Dennis later founded his own residential remodeling company. At Cabinet IQ of Fresno, your installation starts with a visit to our showroom on North Ingram Avenue.
Installation for each countertop material
Every install follows the same path from template to walkthrough. What changes is how each material is handled along the way.
Granite pieces are laid out on the slab before cutting, so the strongest part of the pattern lands where it's seen most. The stone needs a sealer, so ask whether yours is sealed before it leaves the shop or once it's set.
Porcelain slabs are thinner than stone, so the edge profile and the sink and cooktop cutouts call for extra care in cutting. The slab is supported flat as it's carried in and set, until it rests fully on the cabinets.
From template to install day
Here's what happens between choosing your material and cooking on your new counters, in the order it happens.
Your free design consultation at 7591 N Ingram Ave #103 settles the material, the edge and the layout. The kitchen design process in Fresno includes a 3D rendering of the finished room, and every design passes our 57-point design Quality Assurance Check before installation.
Our installers set your base cabinets and level them before anyone measures for stone. A run that's off by a fraction of an inch at this stage would show up later as a counter that rocks or a seam that won't sit flush.
Once the cabinets are level, we template each counter run on site. Seam locations, overhangs and the sink and cooktop openings are fixed at this visit, so have your sink, faucet and cooktop chosen beforehand.
It helps to be home for the template. The number of faucet holes and the spot for a soap dispenser are decided on the day.
The template goes to our own fabrication team, not an outside shop. They cut each piece, shape the edge you picked and open the sink and cooktop holes to the measurements of your models.
The crew brings each piece in, sets it on the cabinets and joins the seams with tinted epoxy until they sit flush. Any adjustments to fit are made on site while the stone is in place.
Empty the counters and the cabinet under the sink beforehand, and keep pets in another room while the stone comes in. Ask at your consultation who reconnects the sink and cooktop on your project, since the sink is out of use until then.
Before the crew leaves, we go over every counter with you. It's the moment to point out anything you'd like adjusted while the tools are still on site, from a seam to the caulk line at the wall.
Why one team for cabinets & counters
When the cabinets and the stone come from different companies, each step waits on someone else. Here's how the same steps run with one team:
| Step | Two separate companies | Cabinet IQ of Fresno |
|---|---|---|
| Checking the cabinets are level | The fabricator finds out at the template visit | Our installers level them before the template |
| Booking the template | Waits until the cabinet company says the boxes are done | Scheduled by the team that set the cabinets |
| A cabinet that needs adjusting | Can mean a return trip from a different crew | Handled by the team already on the job |
| Your point of contact | One for cabinets and one for stone | One team from design to walkthrough |
If anything about the cabinets changes during the project, the counter plan changes with it, on one schedule.
Caring for your new countertops
Give the seams and any silicone until the next day before setting heavy pots or appliances on them, or leaning on an overhang. After that, each material asks for something a little different.
- Quartz: set hot cookware on a trivet or board rather than straight on the surface
- Granite: keep the sealer in good shape, and blot oil before it has time to soak in
- Porcelain: take care with hard knocks on edges and corners, where thin slabs are most likely to chip
- Every material: clean with warm water and a mild dish soap, and cut on a board
Day-to-day care for quartz countertops in Fresno, which never need sealing, differs from care for granite countertops, which do.
What's included with your countertop installation
Design, templating, fabrication and installation are all handled by Cabinet IQ of Fresno, with no outside installer. We don't sell sinks, and the one you buy sets the size of the opening we cut.
Still choosing a countertop?
We install quartz, granite, quartzite and porcelain. If the material isn't settled yet, the showroom has all four laid out next to the cabinet doors they'd sit on.
View kitchen countertopsCountertop installation near Fresno
From our North Ingram Avenue showroom, we install countertops across Fresno and in:
Clovis, Fig Garden, Harlan Ranch, Madera, Palm Bluffs, River Park, Van Ness, Woodward Lakes.
Frequently asked questions
Usually not. Most cutting happens in the fabrication shop, so on-site dust is limited to small fitting adjustments. Covering nearby furniture is still a sensible precaution.
Usually, yes. Flooring typically goes down before the cabinets so it runs underneath them, and the countertops follow once the cabinets are set and level.
Walls are rarely perfectly straight, so stone is set with a slight gap rather than forced tight. Caulk or the backsplash covers it once the counters are in.
Yes, as long as the exact models are known. Openings and clearances are cut from the manufacturer's specifications, so the appliance itself can arrive later.
It's best to be there when the crew arrives and again for the walkthrough. In between, the crew can work on its own as long as the path to the kitchen is clear.