When a remodel moves the sink, the range or the island, the cabinet plan is drawn around where they land. Settle the layout first, then size the cabinets to it. Our team is licensed and insured and brings over 20 years of experience in general contracting to the whole job.
Custom Cabinets in Lee's Summit, MO
Made to order for your kitchen & the rooms beyond it
Custom cabinets in Lee's Summit start with your own walls, measured, and end with boxes built for that one room. The line is drawn in ⅛-inch steps, so the cabinet beside the fridge or under a window takes the exact width the space leaves.
That precision earns the most outside the kitchen. A wet bar tucked beside the basement stairs or a desk wall in a spare bedroom rarely lines up with stock widths, and an awkward gap is hard to miss in a small room.
At Cabinet IQ of Lee's Summit, you test the doors and drawers in person at our Ward Road showroom, and our own team installs what you pick. We replace cabinets with new ones; we don't reface or paint old boxes.
Custom cabinets by project
Most custom cabinet orders in Lee's Summit are one part of a larger plan. Here's how the cabinets connect to the rest of the work.
Quartz, quartzite, granite and solid surface are all fabricated and installed in house, so the counter and the cabinets under it stay with one crew. Carry your door sample over to the countertop display before you settle on either one.
A free 3D rendering puts your chosen line and door into a model of your actual room. It's also where you catch what a floor plan hides, such as a dishwasher door that hits the island when it's open.
How to choose custom cabinets in Lee's Summit
A good custom order comes from a few decisions made in the right sequence. Take them in this order, and each one narrows the next.
Your order begins with a free design consultation at 450 SW Ward Rd. Homeowners who review us often mention the showroom displays, because feeling a drawer glide shut tells you more than any brochure.
Before you come, measure each wall and mark where windows, doors and outlets sit. For a basement or office, note the ceiling height and any soffits or ductwork, since lower levels often have both.
We carry all three lines, so your designer can price the same room in each. Stock is the most economical, comes in 3-inch increments and has the fastest lead time. Custom is made to order in the USA, with unlimited door and color combinations.
Semi-custom widens stock's range of finishes, sizes and storage without going fully made to order. If several rooms are on your list, ask about different lines in different rooms, such as custom in the kitchen and a more economical line in the garage.
Decide what each cabinet will hold before you choose a door. Deep drawers in the base cabinets keep pots and dishes easier to reach than shelves behind a door, since you lift things out instead of kneeling to find the back.
Make a list of what doesn't fit anywhere today, from a stand mixer to bar glassware. Your designer can then size a cabinet for each item rather than leaving it to a spare shelf.
With unlimited combinations on the custom line, the limit is your house rather than a catalog. A slab door gives a clean face with no recesses to catch dust. A five-piece door with a recessed center panel reads more traditional and suits older trim.
Judge the finish in the light it will live in. A basement bar under pendant lights and a lake-house kitchen with tall windows can make the same color look like two different ones.
Pick the hardware with the door rather than after it. A long pull on a narrow drawer can run past its edges, and small knobs are hard to grip on a full-height pantry door.
Photograph the door and hardware you like next to the countertop slabs, then look at the photo at home beside your floor. A pairing that worked under showroom lights can shift over your own flooring.
Custom cabinets beyond the kitchen
The kitchen is where most orders begin. The rooms Lee's Summit homeowners ask about next are often downstairs or out in the garage:
| The space | Where custom helps |
|---|---|
| A basement bar | The run can be sized around a support post or the space under the stairs, with glass uppers for glassware and an opening planned for a wine fridge. |
| A home office | Doors close over files and the printer at the end of the day, and the desk run can be built to fit the window wall exactly. |
| A garage wall | Closed cabinets take tools and car supplies off the floor, planned around the water heater or the door into the house. |
| A lake-house kitchen at Lake Winnebago or Lake Lotawana | Extra drawers hold serving pieces for summer guests, and the island can face the windows and the water. |
| A kitchen addition in Loch Lloyd | New cabinets are planned with the addition's framing, so the larger room and the original kitchen read as one space. |
Bring photos of every room on your list, even the ones planned for later, and we'll draw them together.
Caring for custom cabinets in Missouri weather
Wood cabinets respond to the air around them more than to how you clean them. Missouri's humid summers and dry, heated winters make doors and face frames swell and shrink a little each season.
- Run a dehumidifier in a basement bar through the summer, since lower levels hold damp air longest
- Keep the heat and air on at a lake house you close for the winter, rather than letting rooms sit unconditioned for months
- Test any new cleaner on the inside of a door before you use it on the front
- Check the floor of a bar's sink cabinet now and then, where a slow drip can sit unseen
A thin line that shows at the edge of a door's center panel in January is the wood moving with the season. It isn't a defect, and it usually fades once the air turns humid again.
What comes with every custom cabinet
Pull out any drawer on our custom line and you'll see an upgraded dovetail drawer box running on upgraded soft-close hardware, inside an all-wood cabinet box. Each order is made in the USA to your measurements and backed by a limited lifetime warranty.
You pay nothing for the design consultation or the 3D rendering, and our own crew sets the cabinets.
Not sure custom is the right line?
For some rooms, stock or semi-custom is the sensible choice, and your designer will tell you so. Look at all three lines on Ward Road and compare prices for the same layout before you decide.
View kitchen cabinetsCustom cabinets near Lee's Summit
Our showroom is at 450 SW Ward Rd, open Monday to Friday from 10 am to 4 pm. Along with Lee's Summit itself, we design and install custom cabinets in:
Belton, Blue Springs, Independence, Lake Winnebago, Loch Lloyd, Raymore, Raytown.
Frequently asked questions
There's no flat rate. Cabinet count, the door and finish, and the storage inside each box set the price. If the cabinets are part of a kitchen remodel in Lee's Summit, countertops and installation join the budget too.
Yes. We plan the cabinet run around both, sized to the exact models. We don't sell sinks or appliances, so choose them before the design is final, since the openings follow their dimensions.
They can, but wood reacts to wide swings in temperature and humidity. An insulated or heated garage protects the finish best, so raise it with your designer before ordering for a garage that freezes in winter.
You can, but a stain or paint from a later production run may differ slightly from your first order. Ordering both rooms at the same time gives the closest match.
Usually not. If you plan to sell within a year or two, stock or semi-custom gives a finished look for less. Custom pays off in a home you'll live in and use every day.