Design turns your measurements into elevations of every wall, with appliance openings, panel widths and crown height worked out. Viewing the run in 3D shows whether a tall pantry crowds a window or a range hood sits off center before any box is built.
Custom Cabinets in Dallas, TX
Cabinets drawn for your rooms, not pulled from a catalog
Custom cabinets in Dallas give you control over the size of every box and over door and finish combinations no catalog line will offer. That matters most in houses that don’t follow standard dimensions, from a 1920s Highland Park kitchen to a new build with 10-foot ceilings.
Semi-custom sits between custom and stock. It opens up more finishes, storage options, sizes and styles than stock, while staying inside a set range, and for many kitchens that range is enough.
Cabinet IQ of Dallas sits among the cabinet, lighting and bath showrooms of the Design District, and the door samples on Irving Boulevard are there for homeowners and for the designers who bring them. Visits need an appointment.
Custom cabinets by project
Custom work rarely stops at the cabinet boxes. The rooms and surfaces around them shape the order too.
The custom line isn’t limited to the kitchen. A primary-bath vanity can repeat the kitchen door in a different color, or carry the same finish into the bath, and it’s built to the exact width between the walls.
Stone and cabinets affect each other’s measurements. A thick mitered edge drops below the top of the cabinet face, so the top drawers are set lower to clear it, and a seating overhang needs support built into the cabinet sides.
How to plan custom cabinets in Dallas
Custom work involves more choices than any other tier, and these five are where most of the design time goes.
Your first step is a free consultation in the Design District showroom, where painted and stained doors hang in full size. Opening and closing a real door tells you more about weight, hardware and finish than any spec sheet.
Many designers start here with a client, narrowing doors and finishes before the layout is drawn. Homeowners can do the same with a few photos of rooms they like, even ones torn from a magazine.
Custom boxes are made to order in ⅛-inch increments, with dovetail drawer boxes and soft-close hinges at the upgraded level. Stock comes in 3-inch increments with popular door and color pairings and the quickest turnaround. Semi-custom widens the stock choices without the made-to-order build.
The easiest way to pick a tier is to look at the hardest wall in the room, not the average one. If the trickiest run fits well in a set size range, semi-custom may cover the kitchen. If it doesn’t, custom usually saves the compromises.
An inset door sits inside the face frame, flush with its surface, so the frame shows around every door like a piece of furniture. A full overlay door covers the frame almost completely for a smoother, more modern front. Inset gives up a little interior width, so drawers and openings come out slightly smaller.
Inset also depends on an even gap around each door. Wood moves with indoor humidity, so keeping the air conditioning running through a Dallas summer, even in an empty house, keeps those gaps consistent.
Rift-cut white oak has a straight, calm grain that suits modern and mid-century Dallas homes, and one Dallas customer chose it for European frameless cabinets. Painted finishes suit traditional kitchens and pair well with inset doors.
On painted five-piece doors, a hairline can appear at the joints as the wood shifts between seasons. That’s normal wood movement, not a defect, and stained finishes tend to hide it.
Custom lets the inside of each box match what goes in it. Spice pull-outs beside the range, tray dividers above the oven and an appliance garage for the mixer keep counters clear. A tall pantry with roll-out shelves often replaces a walk-in that the floor plan can’t spare.
In homes with 10-foot ceilings, uppers can stack to the ceiling, with glass on the top row for display and closed doors below for daily use.
Custom cabinets in Dallas homes
In Dallas, the age of the house usually points to a cabinet style before any samples come out. Four common cases:
| Home | Cabinet approach |
|---|---|
| A 1920s or 1930s house in Highland Park | Painted inset doors on a beaded face frame match the original millwork in the rest of the house. |
| A 1970s or 1980s home in Garland | Old soffits above the uppers often come out, so new cabinets can run taller once what’s inside them is checked. |
| A lake house in Rockwall or Heath | An island and bar seen from the living area need finished end panels and storage for glassware on the guest side. |
| A Sunnyvale or Forney new build | Stacked or extra-tall uppers fill the wall up to a 10-foot ceiling instead of leaving a dust shelf above. |
Older houses on this list usually need more site measuring than new builds, so expect a longer first visit for those.
Caring for wood cabinets in North Texas
Wood cabinets last decades with a little attention, and most of it comes down to moisture and the right cleaner:
- Keep indoor humidity steady year-round, since sharp swings make doors and drawer fronts shift
- Wipe fronts with a soft, damp cloth and a drop of dish soap, then dry them, skipping ammonia and all-purpose sprays
- Wait a few minutes before opening the dishwasher after a cycle, so steam doesn’t hit the cabinet edges above it
- Dry spills around the sink base right away, because standing water swells edges over time
Soft-close hinges can drift out of alignment after the first year of use, and a small screw adjustment brings the doors back in line.
What comes with custom cabinets
On the custom line, each box is built to order in all wood and assembled in the USA. Drawers run on upgraded dovetail boxes and doors shut on upgraded soft-close hinges. A limited lifetime warranty covers the cabinets.
Nothing is ordered until you’ve approved the 3D renderings from your free consultation. Our own team installs the cabinets, and countertops can be fabricated and set by the same crew.
Not sure custom is the right tier?
Plenty of Dallas kitchens are well served by semi-custom or stock lines. Seeing one layout drawn in each of the three tiers shows where the differences actually land.
View kitchen cabinetsCustom cabinets near Dallas
From our Irving Boulevard showroom, we design and install custom cabinets throughout Dallas and in:
University Park, Highland Park, Bluffview, Garland, Rowlett, Rockwall, Heath, Wylie, Sunnyvale, Forney.
Frequently asked questions
Run length, door style, finish and the fittings inside each box set the price. At your free consultation, the layout becomes a priced design you can adjust before ordering.
Usually, yes. Custom finishes cover a very wide range of colors, so bring a painted trim piece or a removed door to the showroom for the closest match.
Yes. A panel-ready refrigerator or dishwasher can take a front made in the same door style and finish, so it blends into the cabinet run. Have the appliance specs at hand for the design.
A little. The gap around an inset door shows any movement, so a hinge adjustment after the first full year keeps it even. Day-to-day cleaning is the same.
Yes, since the line is made to order. Stain and paint batches can differ slightly, though, so rooms that sit side by side are best ordered together.